 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MN101E30R Type Internal ROM type ROM (byte) RAM (byte) Package (Lead-free) Minimum Instruction Execution Time MN101E30R Mask ROM 928K 6K QFP100-P-1818B (Under development) 50 ns (at 2.2 V to 5.5 V, 20 MHz) 50 ns (at 2.2 V to 5.5 V, 20 MHz) * at internal 2 , 3 , 4 , 5 , 6 , 8 , 10 times oscillation used MN101EF30R FLASH Interrupts 6 external interrupts, 30 internal interrupts RESET, Watchdog, External 0 to 4, Timer 0 to 4, Timer 6, Timer 7 (2 systems), Timer 8 (2 systems), Timer 9 (2 systems), Time base, Serial 0 (2 systems), Serial1 (2 systems), Serial 2 (2 systems), Serial 3 (2 systems), Serial 4, Serial 5, A/ conversion finish, Automatic transfer (2 systems), Key interrupts, end of single tone, end of phrase Timer counter 0 : 8-bit x 1 (timer pulse output, event count, added pulse (2-bit) system PWM output, generation of remote control carrier, simple pulse measurement, real time output control) Timer counter 1 : 8-bit x 1 (timer pulse output, event count, 16-bit cascade connected (timer 0, 1) timer synchronous output event) Timer counter 2 : 8-bit x 1 (timer pulse output, event count, added pulse (2-bit) system PWM output, simple pulse measurement, 24-bit cascade connected (timer 0, 1, 2), timer synchronous output event, real timer output control) Timer counter 3 : 8-bit x 1 (timer pulse output, event count, generation of remote control carrier, 16-bit cascade connected (timer 2, 3), 32-bit cascade connected (timer 0, 1, 2, 3)) Timer counter 4 : 8-bit x 1 (timer pulse output, added pulse (2-bit) system PWM output, event count, serial transfer clock, simple pulse measurement) Timer counter 6 : 8-bit free run timer, time base timer Timer Counter Timer counter 7 : 16-bit x 1 (timer pulse output, event count, High accuracy PWM, High performance IGBT output (cycle/duty continuous variable) timer synchronous output event, input capture (Both edge available), real timer output control), double buffer compare register Timer counter 8 : 16-bit x 1 (timer pulse output, event count, High accuracy PWM output (cycle/duty continuous variable) pulse width measurement, input capture (Both edge available), 32-bit cascade connected (Timer 7 , 8), 32-bitPWM output, synchronous output event), double buffer compare register Timer counter 9 : 16-bit x 1 (timer pulse output, event count, High accuracy PWM output (cycle/duty continuous variable), pulse width measurement, input capture (Both edge available), real timer output control), double buffer compare register Timer counter A : 8-bit x 1 (event count, Serial transfer clock timer, clock for function (timer, serial, LCD)) Watchdog timer Serial interface Serial 0 ~ 3 : UART (full duplex) / synchronous x 1 Serial : multi master IC / synchronous x 1 Serial 5 : IC slave x 1 2 systems (External request/internal event request/software request maximum transfer cycles are 255) DMA controller I/O Pins I/O 86 common use, Specified pull-up/pull-down resistor available, Input/output selectable (bit-unit) MAD00063AEM MN101E30R A/D converter D/A converter 10-bit x 12-ch. 8-bit x 4-ch. 20-bit x 1-ch. LCD 55 segments x 4 commons (static, 1/2, 1/3, 1/4 duty) 1/3 bias, Usable if VLC1 VDD Buzzer output, remote control carrier signal output, high-current drive port Correcting address designation : up to 7 addresses possible In-circuit Emulator PX-ICE101E PRBV101E30-QFP100-P-1818B (Under development) Display control function Special Ports ROM Correction Development tools Pin Assignment P50, SBO0A, TXD0A, KEY0, D0 P51, SBI0A, RXD0A, KEY1, D1 P54, NBUZZERA, KEY4, D4 P53, BUZZERA, KEY3, D3 P70, SBO2A, TXD2A, A6 P66, SBO4A, SDA4A, A4 P67, SBT4A, SCL4A, A5 P71, SBI2A, RXD2A, A7 P52, SBT0A, KEY2, D2 P43, SBO0B, TXD0B 52 P64, TM4IOB, A2 P63, TM3IOB, A1 P62, TM1IOB, A0 P65, SBI4A, A3 P55, KEY5, D5 P56, KEY6, D6 P57, KEY7, D7 P46, SDA5B P44, SBI0B, RXD0B 53 P72, SBT2A, NWE 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 P47, SCL5B P61, DA_B P60 55 54 P45, SBT0B P73, SDA5A, NRE P74, SCL5A, NCS P75, SBO1B, TXD1B, A8 P76, SBI1B, RXD1B, A9 P77, SBT1B, A10 P80, TM9OD0, PWM00, SDO0, A11 P81, TM9OD1, PWMN00, SDO1, A12 P82, TM9OD2, PWM01, SDO2, A13 P83, TM9OD3, PWMN01, SDO3, A14 P84, TM9OD4, PWM02, SDO4, A15 P85, TM9OD5, PWMN02, SDO5, A16 P86, SDO6, A17 P87, SDO7, A18 P92, A19 P93, NDK P94, DA_C, SYSCLK P95, DA_D AVDD DA1_AOUT DA1_DOUT AVSS PB3, AN11 PB2, AN10 PB1, AN9 PB0, AN8 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 10 12 13 14 15 16 17 18 19 20 21 22 23 24 100 1 2 3 4 5 6 7 8 9 11 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 25 26 P42, SBT3B P41, SBI3B, RXD3B P40, SBO3B, TXD3B P36 P35, SBI4B P34, SBT4B, SCL4B P33, SBO4B, SDA4B P32, SBT2B P31, SBI2B, RXD2B P30, SBO2B, TXD2B P16, TM8IOC, NBUZZERB P15, TM7IOC, BUZZERB P14, TM4IOC P13, TM3IOC P12, TM1IOC P11, TM2IOC P10, TM0IOC, RMOUTC P24, IRQ4 P23, IRQ3 P22, IRQ2 P21, IRQ1, ACZ1 P20, IRQ0, ACZ0 P07, LED7, DA_A P06, LED6, SBT3A P05, LED5, SBI3A, RXD3A P04, LED4, SBO3A, TXD3A MN101E30R VDD5 VDD3 P00, LED0, TM7IOB, SBI1A, RXD1A P02, LED2, TM9IOB, SBT1A VREF+ P27, NRST OSC1 P91, XO P90, XI OSC2 VSS MMOD VDD18 QFR100-P-1818B MAD00063AEM P03, LED3, TM0IOB, TM2IOB, RMOUTB DMOD P01, LED1, TM8IOB, SBO1A, TXD1A PA1, AN1, TM1IOA PA2, AN2, TM2IOA PA3, AN3, TM3IOA PA4, AN4, TM4IOA PA5, AN5, TM7IOA PA6, AN6, TM8IOA PA7, AN7, TM9IOA PA0, AN0, TM0IOA, RMOUTA ATRST Request for your special attention and precautions in using the technical information and semiconductors described in this book (1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) The technical information described in this book is intended only to show the main characteristics and application circuit examples of the products, and no license is granted under any intellectual property right or other right owned by our company or any other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: - Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. - Any applications other than the standard applications intended. (4) The products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. Industrial Co., Ltd. |
Price & Availability of MN101EF30R
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |